manualshive.com logo in svg

Mustang Survival EP 38, Руководство пользователя

Поделиться
Скачать
Mustang Survival EP 38 Скачать руководство пользователя страница 30

30 

MUSTANG SURVIVAL

/ OWNER'S MANUAL –

 INFLATABLE PERSONAL FLOTATION DEVICE

LEAK TEST:

Orally inflate your PFD until firm and let stand 16 hours. As long as 
your PFD has been inflated orally (not by CO

2

 cylinder ) it should hold 

its firmness for this length of time. If this is not the case, your PFD is 
leaking and should be replaced. If your Inflatable PFD leaks, contact 
Mustang Survival customer service. Deflate and repack the PFD as 
outlined in Repacking (p. 24).

ORAL INFLATION VALVE TEST:

Fully inflate the PFD using the oral inflator and hold valve under 
water. To avoid accidental inflation, don't allow the water to contact 
the hydrostatic inflator. If bubbles appear, deflate and re-inflate to 
test again. Should the leak persist, contact Mustang Survival customer 
service.

THOROUGH VISUAL EXAMINATION:

See Inspecting Components (p. 10).

AFTER EACH INFLATION

Deflate and re-arm, as described in Re-arming (p. 19).

ANNUALLY

Perform the following at the beginning of each boating season, after 
inflation, or whenever the integrity of the PFD is in doubt:

1.  Check all components for dirt or corrosion. Clean or replace, as 

necessary. See Inspecting components (p. 10).

2.  Visually examine your PFD for damage or excessive abrasion, wear, 

tear, or contamination. Particular attention must be paid to the 
stitching, straps and hardware. If in doubt, contact Mustang Survival 
customer service for evaluation and/or servicing.

3.  Perform the Leak test as described in Every two months care and 

maintenance instructions (p. 29).

4.  Perform the Oral inflation valve test as described in Every two 

months care and maintenance instructions (above). 

5.  Ensure the date on the inflator has not already passed. If it has, 

replace the inflator. See Re-arming (p. 19).

Содержание EP 38









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды