Mustang Survival EP 38, Руководство пользователя

Страница: 22 / 40

22
MUSTANG SURVIVAL
/ OWNER'S MANUAL –
INFLATABLE PERSONAL FLOTATION DEVICE
14. Hold the cylinder in place to keep the inflator body from moving;
press (yellow and black) inflator cap onto the inflator body, with
the inflator cap’s water inlet valve (looks like a small yellow tube)
at a 90 degree angle to the cylinder – as long as your cylinder
matches the screen print! (Fig. 21, and Fig. 22)
15. (If you were wearing the PFD, the water inlet valve of the inflator
cap would point toward your feet, and – once you finish re-arming
–should fit snugly under the molded rubber cover.)
16. Press down firmly on the yellow piece of the inflator cap, and grip
the black locking ring underneath.
17. Tighten the black locking ring by turning it clockwise to the right,
behind the yellow cap until it clicks (Fig. 23).
18. Tug on the inflator cap to make sure it’s firmly connected to the
inflator body and cylinder.
19. Gently tuck each end of the (silver) pull-handle – which is attached
to the inflator cap by a lanyard – into the stretch tabs next to the
inflator cap, taking care not to pull the lanyard and unintentionally
inflate your PFD.
20. Tuck in the tabs of the front flap (on three sides)
21. Close front flap over the inflation equipment (with window and
molded rubber cover fitted in place) and press the Velcro™ strips
together (Fig. 24).
22. Ensure you have successfully re-armed by performing a leak test
(see Care and Maintenance/Every two months, p. 29)