manualshive.com logo in svg

Mustang Survival EP 38, Руководство пользователя

Поделиться
Скачать
Mustang Survival EP 38 Скачать руководство пользователя страница 12

12 

MUSTANG SURVIVAL

/ OWNER'S MANUAL –

 INFLATABLE PERSONAL FLOTATION DEVICE

PUTTING IT ON (DONNING)

 •  Pull PFD over your head like 

a T-shirt, pushing your arms 
through the spaces created by 
the side straps (Fig. 5)

•  To tighten: reach under your 

arms, grasp both side straps at 
once, and pull back 

•  The bottom of your PFD should 

rest above your lowest ribs 
by at least 2 inches (5 cm). 
This means your PFD only 
goes where your ribs can 
most effectively protect your 
internal organs against external 
pressures.

•  Check fit by pinching each 

side strap, just as you would 
a waistband. If you can pinch 
the material together (Fig. 6), 
tighten your PFD. 

YOUR PFD MUST BE WORN…

Deflated: For the comfort that encourages use, and especially:

  •  to protect the inner inflating bladder until it’s needed

  •  to set up the crucial pressure difference needed to ensure 

automatic inflation.

Outside all clothing: 

Allows complete inflation – without damage to 

your gear or to your person. Your PFD must be your very last layer.

Without constraints: 

Do not tie or sew anything to the outside of (or 

around) your PFD, as it may compromise your PFD’s ability to inflate.

If you fail to meet any one of these conditions, you may cause 
damage to yourself or your PFD.

FIGURE 5

FIGURE 6

Содержание EP 38









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды