Must PH50-10000T, Руководство пользователя

Страница: 14 / 32

-11-
max 15 °
Direction Min. clearance (cm)
above 30
below 50
sides 30
front 30
30cm 30cm
3
0
c
m
3
0
c
m
Ambient dimensions of one inverter
4.4 Selecting the installation location
This is guidance for installer to choose a suitable installation location, to avoid potential
damages to device and operators.
The installation location must be suitable for the inverter's weight and dimensions for a
long period time.
Select the installation location so that the status display can be easily viewed.
Do not install the inverter on structures constructed of flammable or thermolabile materials.
Never install the inverter in environment of little or no air flow, nor dust environment. That
may derate the efficiency of the cooling fan of the inverter.
The Ingress Protection rate is IP65 which means the inverter can be installed outdoors and
indoors.
The humidity of the installation location should be 0~95% without condensation.
The installation location must be freely and safely to get at all times.
Vertically installation and make sure the connection of inverter must be downwards. Never
install horizontal and avoids forward and sideways tilt.
Fig 4.1
Be sure that the inverter is out of the children’s reach.
Don’t put any things on the inverter. Do not cover the inverter.
Do not install the inverter near television antenna or any other antennas and antenna
cables.
Inverter requires adequate cooling space. Providing better ventilation for the inverter to
ensure the heat escape adequately. The ambient temperature should be below 40°C to
ensure optimum operation.
Do not expose the inverter to direct sunlight, as this can cause excessive heating and thus
power reduction.
Observe the Min. clearances to walls, other inverters, or objects as shown in the diagram: