5
this feature allows you to operate the unit in 2 different ways;
• As a full featured fireplace insert with both flame effect and heater operating simultaneously.
• As a visual effect with flame effect only. (i.e. no heating cycle)
NOTE:
this firebox insert is not designed to operate in “heat” only mode without a flame effect.
All of the firebox control functions can be accessed in 2 ways:
2. U
sing
the
manUal
controls
located
on
the
firebox
behind
the
Upper
front
access
panel
:
1.
ON/OFF:
(the master power switch-1a must be "on")
Press the "on/off" button (1b) on the touchpad, the
flame effect (only) will turn on. to turn the firebox
"off" press the "on/off" button again. (notE: the
"on/off" button on the firebox does "not" control the
master power "on/off" switch)
2.
FLAME EFFECT:
(See details above under Remote
Control)
3.
HEATING
:
(See details above under Remote Control)
4.
ACCENT LIGHTING
:
(See details above under Remote
Control)
1a
3
4
2
1b
1. U
sing
the
remote
control
:
1.
ON/OFF:
(the master power switch must be "on")
Press the "on/off" button on the remote control, the
flame effect (only) will turn on. to turn the firebox
"off" press the "on/off" button again.
2.
FLAME EFFECT:
Press the flame button to achieve the
desired effect. (no heat)
3.
HEATING
:
Press the heat button "once" for "low"
and/or "twice" for "high" to achieve the desired
level. (notE: the flame effect is always active when
the heating cycle is operational) Press the button a
"third" time turns the heating cycle off.
4.
ACCENT LIGHTING
:
Allows you to create mood and
highlight inside your firebox. Low, medium, high, off.
2
3
1
4
