SELECTING A PLAYER
Before selecting a source for music always select
a Player to play to. First tap the Players icon,
the app will display Players it can find on your
network. Now tap the Player you require.
If you wish to select more than one Player (for
synchronised playback to several at once) first
choose one Player then press its group button.
You can now select which Players you wish make
into a group with this Player.
After selecting a Player or Players you can select
a source of music as below.
PLAYING INTERNET RADIO
The Musaic MP5 and MP10 Music Players come with four pre-configured Internet Radio memories set
by us at the factory. These can be accessed without needing the app by pressing the buttons on the
top of the unit for two seconds (when the unit is not playing from Bluetooth or a streaming service).
To browse thousands of internet radio stations and set your own memories in place of our
demonstration ones use the Musaic app as follows:
1. Select the internet Radio menu.
2. Tap Local for stations that are close to you
(the Musaic system uses your IP address to
estimate your location).
3. Tap a station you would like to listen to.
A menu will pop up as shown where you can
play the station now or add it to a Preset. When
you tap Play now the Musaic Player or group
of Players you previously selected should start
to play that station. Note this may take a few
seconds depending on the buffering time for
that station over the internet. If the station is
offline or not available, playback might not start.
Simply select a different station.
12
© Musaic Ltd. October 2015
