As from: 02.05.2006
Murrplastik Systemtechnik - ACS Werner Tubach
14
8902864602
MP Engraving unit
3.0 Assembly and connection
3.6 Aligning the engraving unit
Place the calibration block on the black pins on the plotter.
(Pic. 1)
Slide the plotter arm with the engraving head towards the block
until it stops firmly. (Pic. 2)
Align the engraving head upright and screw tightly the counter
bearing.
Place the covering cap on the engraving head.
Pic. 1
Pic. 2
