As from: 02.05.2006
Murrplastik Systemtechnik - ACS Werner Tubach
17
8902864602
MP Engraving unit
3.0 Assembly and connection
3.8 Connecting the vacuum hose and the spindle cable
Move the engraving head manually in the bottom right corner of
the plotter. Plug in the hose at its pipe at the head, put it in the
clamping piece (support arm), and connect it with the vacuum
cleaner.
Connect the spindle and the VEC controller with the cable and
clamp it in the support arm as well.
(See pictures next page)
