Murideo MU-M4SOL, Руководство пользователя, Страница: 76 / 130

MU-M4SOL
User’s Manual
Page 76 of 130
The Tx configuration screen appears as shown in the figure below:
Figure 93: Tx Configuration Screen
The remote and local HDBaseT transceivers are identified – as either transmitter or receiver – and
displayed at the top of the page.
NOTE
The system correctly identifies the local and remote transceivers – even when both are transmitters, or both
are receivers.
Tap on either the local or the remote entity to display configuration information (read only):
◼
FW Ver. The HDBaseT chip ’s firmware version.
◼
Pixel Clock. The clock frequency of the video transmission. The Pixel Clock values in the
receiver and transmitter screens should be similar.
◼
Chip Class. Class of HDBaseT chip, according to the HDBaseT Standard.
◼
Chip Type. The chip model/part number.
◼
Supported System Features. The interfaces that are extended by the chip over the HDBaseT
link, such as: Ethernet, RS232, IR (Infrared support provided by the chip).
◼
Link Status. HDBaseT or No link.
◼
System Mode. Specifies whether Operating Mode changes are performed automatically or
manually.
◼
Operating Mode. Current HDBaseT operating mode – HDBaseT, LPPF1/2, Disconnect, FB
(Ethernet Fallback), or Bypass Mode.
HDCP
Indicator