Murideo MU-M4SOL Скачать руководство пользователя страница 19

Страница: 19 / 130

MU-M4SOL

User’s Manual

Page 19 of 130

◼

Connecting the CATx cable to the

MU-M4SOL

receiver module and connecting the

receiver module to the sink device with an HDMI cable.

Insert the power supply connector into the designated socket in the main unit to provide
power.

NOTE

The MS103TDs should be powered by a 48V Power Supply

For the MS104B, use a 12.6V Power Charger.

4.2

Performing the Tests

4.2.1

Main Screen

The main screen (see the figure below) offers the following functionalities:

◼

Information.

The

Figure 15:

MU-M4SOL

Main Screen

icon provides access to informative guidelines and system documentation.

◼

HDBaseT Analyzer

◼

Basic Analysis: Basic Pass/Fail report.

◼

Performance: Real-time access to HDBaseT cable performance data.

◼

Configuration: Read-only access to the system configuration.

◼

Tools

◼

HDMI Generator: HDMI Pattern Generator.

◼

EDID Analyzer: Access information on the display capabilities of HDMI sink devices.

◼

Certification report: Collect the data required to produce the HDBaseT test report.

Содержание MU-M4SOL



































































































































Результаты поиска

Содержание MU-M4SOL

Отзывы:

Murideo MU-M4SOL, Руководство пользователя, Страница: 19 / 130

Результаты поиска

Содержание MU-M4SOL

Отзывы: