Munters Rotem Trio, Руководство пользователя

Страница: 24 / 98

© Munters AB, 2020 24
3. Define:
o
Day tab: This defines the growth day at which the program runs until the next defined
day. Define up to eight days.
o
Feeding Start time: Define the time when each feed run begins. Add more starting times
as required.
o
Feeding Runtime (min.): Define how long the feed runs last.
o
Feed Line Sensor Max. Delay (min.): Define the maximum amount of time that can pass
from a feeding start time before Trio generates an alarm.
4. If required, go to Control > Feed > Settings to set the alarms. Enable the alarms.
5. Click and define the feeder:
o
Alarm Time Frame: Define the period in which the feeders and auger are active, 24 hours
a day or specific time frames.
o
Alarm Start Day: The growth day on which the controller begins to send alarms.
o
Over/Under Runtime: If the feeders and auger run more or less (respectively) than these
times, the controller sends an alarm.
 Feeder overtime alarm: Feeders begin receiving feed when the last pan sends a
signal. Feed distribution continues until the pans are full. If the feed distribution is
longer than the user-defined time, the feeder active sensor should generate an
alarm.

Feeder under time: Feeder under time defines the time required to generate an
alarm when the feeder is not active.