Munters Rotem Trio, Руководство пользователя

Страница: 16 / 98

© Munters AB, 2020 16
2. Define:
o
Growth day: This parameter defines the animals’ age. Growth day automatically goes up
by one (1) at midnight. When editing the growth day, you can increase the number; you
cannot decrease the number. Trio increases the growth day at midnight. Range: 0 - 999
o
Initial Number of Animals: Set the number of animals that are in the beginning of a batch.
NOTE In case animals die, you can edit the number of animals. Go to Adjusting the Animal Count,
page 21.
o
Batch No.: Give a unique number for each herd.
•
Room Mode: Room mode enables or disables general functionality. When defined as Normal,
all functions can be enabled. Growth day is managed as above. If you switch the room to a
different mode, growth day stops advancing and only certain, specific functions are enabled.
o
Growing: Normal running mode. As an option, the Growing mode can be configured in
the wizard. Refer to the next section.
o
Empty
 Provide ventilation according to the output set by the heat and ventilation.

Stop growth day progress.

Stop water alarm even when the alarm function is enabled.
o
Pre Heat: Pre heat facility before moving the animals in to the pre-heat temperature set-
point. If you wish to use this mode, the Wizard option appears. Refer to the next section.
o
Cleaning/Soaking: Between batches the facility is cleaned by pre-soaking and/or
soaking.
 Provide ventilation according to the output set by the heat and ventilation.
 Stop growth day progress.
4.2.1.2 New Batch Wizard
Trio Version 5.0.15 provides a simple to use wizard to set up the Growing or Pre-Heat modes. Using the
wizard enables defining negative growth days. When starting a new batch Trio:
o
Resets historical data
o
Sets the growth day to zero
o
Increases the batch number by one
o
Records a “New Batch” event
1. Click .