- 4 -
Installation procedure:
Remove the sticker from the front panel.
1)
3)
Put the unit into the installation hole.
2)
Fill up sews in the cabinet with sponge
or foam.
● When installing the unit, it should be sl-
between 6-10mm.) (Shown at right
anted down to the back to avoid the en-
largement of noise or vibration. (Slant
● The installation place should be strong
enough to avoid the enlargement of
noise or vibration.
Installation assistance:
● Use iron support
The installation hole should be stro-
●
ng enough to support the air condit-
ioner. If it cannot, iron support has to
be used outdoors. Iron support sho-
it block the air inlet at the side grille.
Wall
Sunshade
board
Rubber
plate
6~10mm
Support
Horizontal line
Use sunshade board
Air conditioner should avoid anything
to be dropped into it and avoid direct
sunshine. If there is no cover on it,
you should contact the seller for inst-
alling the sunshade board. When in-
stalling the sunshade board, don’t let
MUNDOCLIMA
MUVR DC inverter window type
