28
REMOTE CONTROLLER
9
SWING Button
DIRECT Button
Used to change the louver movement and set
the desired up/down air flow direction.
O
The louver changes 6 in angle for each press.
Used to stop or start horizontal louver auto
swing feature.
NOTE:
When the louver swing or move to a
position which would affect the cooling
or heating effect of the air conditioner,
it would automatically change the
swing/moving direction.
MODE
FAN
TEMP
SLEEP
LED FOLLOW ME
TURBO SELF CLEAN
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
1
2
4
3
12
11
13
5
6
10
9
8
7
SWING DIRECT
RG57A6/BGEF
TIMER OFF Button
10
Press this button to initiate the auto-off time
sequence. Each press will increase the auto
-timed setting in 30 minutes increments.
When the setting time displays 10.0, each
press will increase the auto-timed setting
60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-off
time to 0.0.
TIMER ON Button
11
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
12
,
,
,
SILENCE/FP Button
Active/Disable SILENCE function.
function will be activated, pushing more
than 2 seconds again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and creat a quiet and comfortable room
for you. Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity.
The FP function can only be activated
during the heating operation (only when the
setting mode is HEAT). The unit will operate
O
at a setting temperature of 8 C.The display
window of indoor unit will display FP . Press
the buttons of ON/OFF, SLEEP, FP, MODE,
FAN SPEED,UP or DOWN while operating
will cancel the FP function.
,
,
,
UP Button ( )
Push this button to decrease the indoor
o
o
temperature setting in 1 C increments to 17 C.
DOWN Button ( )
13
Push this button to increase the indoor
o
o
temperature setting in 1 C increments to 30 C.
NOTE
：
Temperature contol is not available
in Fan mode.
If pushing more than 2 secons the "FP"
