Multitone RPR 583, Техническое руководство

Страница: 27 / 91

RPR 583
TM1212 Issue 1 Page 2 - 15
If the call is not acknowledged, the pager may be pre-programmed to give a short
alert every two minutes until the battery is exhausted.
If the message is longer than the screen can show, push the
O>
button to show the
next part of the message. Repeat the procedure until the end of message symbol
œ
shows.
To process the message, push the
O>
button again to show the Reviewing Stored
Messages menu (refer to paragraph 2.3.3).
To return to the standby screen, push and hold the
O>
button for one second or wait
for the unit to time-out. If the message has not been read, the standby screen will
show the
symbol.
2.3.3 Reviewing Stored Messages
To display the received messages, starting with the newest message, push the
-
button. The message is displayed with its time and date stamp. If the message
is longer than the screen can show, push the
O>
button to show the next part of the
message. To read another message, use the
¬
or
-
buttons.
When the last part of the message is shown, push the O> button. The display shows
three symbols:
To read the message again, use the
¬
or
-
buttons to select the first symbol then
push the
O>
button.
To delete the message, use the
¬
or
-
buttons to select the second symbol then
push the O> button. The display shows the delete symbol plus a flashing
?
symbol.
Push the O> button again to delete the message.
To put the message in the Archive Store, use the
¬
or
-
buttons to select the third
symbol then push the O> button. The display shows the archive symbol plus a
flashing
?
. Push the O> button again to transfer the message to the Archive Store.
To return to the standby screen at any time, push and hold the O> button for one
second or wait for the unit to time-out.
The unit memory can hold a maximum of 64 messages. When this number is
reached the standby screen shows the memory full
symbol.
If a new message is received when the memory is full, the oldest message is deleted.
Messages which have been read will be deleted before unread messages.