Multitone RPR 583, Техническое руководство

Страница: 16 / 91

ARCHIVE ALERT DISPLAY SET TIME
DELETE
MESSAGES
OFF
ALARM
TAG11350-1
RPR 583
TM1212 Issue1 Page 2 - 4
Figure 2.2: Main Menu
2.2.2 Setting the Options
Make sure that the unit is ON and that the display shows the standby screen. Push
and release the
O>
button. The display will show the main menu of seven symbols.
These are:
Push the
Í
or the
Ì
button to choose the required symbol (the symbol flashes as it
is chosen) then push the O> button to select the function.
Paragraphs 2.2.3 through 2.2.11 give the function and operation of each symbol.
2.2.3 Archive
a) General
This option allows the operator to archive messages and also to view messages
in the archive store.
b) Archiving Messages
Select the required message and view the complete message by pushing the
O> button until the last screen of the message is shown. Push the O> button
once more, then use the
Í
or the
Ì
button to choose the archive symbol.
When the archive symbol flashes, push the O> button. The display shows the
archive symbol plus a flashing
?
. Push the O> button again to transfer the
message to the archive memory.
If the archive is full, the ‘memory full’ symbol will flash. A message must be
deleted from the archive before the new message can be saved.