Multitek MULTIGEN M820-GM Series, Руководство по эксплуатации

Страница: 84 / 90

84
9. MULTIGEN SPECIFICATIONS
INPUT
Rated Un
Direct connected voltages between 57.8
and 600 v. Standard voltages offered :-
63.5/110 V, 69.3 / 120 V, 120 / 208 V,
220/380 V, 230 / 400 V, 240 / 415 V,
277 / 480 V, for 3 ph 4 w
110 V, 120 V, 380 V, 400 V, 415 V, 440 V,
480 V, 600V for3 ph 3 w
Accuracy Range 20-120% Un
WorkingRange 5-125% Un
Burden <0.5VA per phase
Overload 1.5 x Un continuous
4 x Un for 1 second
Rated In 1 or 5 amp
Accuracy Range 20-120% In
WorkingRange 5-125% In
Burden <0.5VA per phase
Overload 4 x In continuous. 50 x In for 1 second
Frequency 50 / 60 Hz nominal range 45/65Hz
DC volts 10 to 30 volts
Hours Run Updated every 2 minutes
SYSTEMS
Single phase
3 phase 3 wire unbalanced load
3 phase 4 wire unbalanced load
ACCURACY
Volt
0.5% of reading ± 2 digits
Amps 0.5% of reading ± 2 digits
Frequency 0.1Hz ± 1 digit
Coolant temp. 1% of reading ± 2 digits
Oil Pressure. 1% of reading ± 2 digits
Hours Run. 1% of reading ± 2 digits
DC volts 1% of reading ± 2 digits
GENMOM.PM5 20/03/100, 10:29 84