40
The second point is now programmed for the pressure
reading. The next set of operations are to program the
pressure values for the 3rd 4th and 5th points.
The sequence of actions for programming points 3, 4 and 5
are identical to programming point 1 as shown on pages 35
to 37.
Once the 5 pressure values are programmed, the
corresponding resistance values have to be programmed as
follows :-
Note first diagram shown below shows the last screen and
action in programming the 5th point of pressure points.
MultiGen GENERATOR MONITORING SYSTEM
MultiGen GENERATOR MONITORING SYSTEM
psi
pnt 5
00oo
ACTION :
Press
COMMENTS :
Press scroll until the 4th
digit shows 0 .
ACTION :
Press
COMMENTS :
The MultiGen is now in the
resistance pressure point
programming mode. The 1st
of the 5 resistance values
points has to be programmed.
The cusor flashes under the
2nd digit.
res 1
0000
MultiGen GENERATOR MONITORING SYSTEM
MultiGen GENERATOR MONITORING SYSTEM
GENMOM.PM5
20/03/100, 10:30
40
