Multitech SocketModem MT2456SMI-22 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 58

background image

Appendix B – Product Approvals, Regulatory Design Considerations, Compliance

Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide

56

7.

Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the
equipment (PC) associated with this device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom’s Specifications:
For repeat calls to the same number:

·

There shall be no more than 10 call attempts to the same number within any 30 minute period for
any single manual call initiation, and

·

The equipment shall go on-hook for a period of not less than 30 seconds between the end of one
attempt and the beginning of the next attempt.

For automatic calls to different numbers:

·

The equipment shall be set to ensure that automatic calls to different numbers are spaced such
that there is no less than 5 seconds between the end of one call attempt and the beginning of
another.

8.

For correct operation, total of the RN’s of all devices connected to a single line at any time should not
exceed 5.

International Modem Restrictions

Some dialing and answering defaults and restrictions may vary for international modems. Changing settings may
cause a modem to become non-compliant with national telecom requirements in specific countries. Also note
that some software packages may have features or lack restrictions that may cause the modem to become non-
compliant.

EMC, Safety, and R&TTE Directive Compliance

The CE mark is affixed to this product to confirm compliance with the following European Community Directives:

Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States
relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States
relating to electrical equipment designed for use within certain voltage limits;
and
Council Directive 1999/5/EC of 9 March on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity.

South African Statement

This modem must be used in conjunction with an approved surge protection device.

«
...
54
55
56
57
58
»

Содержание SocketModem MT2456SMI-22



























































Отзывы:

Нет отзывов

Похожие инструкции для SocketModem MT2456SMI-22

Бренд: Campbell Страницы: 4

Бренд: Sagem Страницы: 158

Бренд: E-Lins Страницы: 39

Бренд: GE Страницы: 5

Бренд: Data-Linc Group Страницы: 19

Бренд: Teledyne Страницы: 3

Бренд: Four-Faith Страницы: 22

HFB-FO-LON Series

Бренд: Buenoptic Страницы: 8

Бренд: Four-Faith Страницы: 34

Бренд: Ebyte Страницы: 32

Бренд: Kinpo Страницы: 7

Бренд: BT Страницы: 20

Бренд: ERE Wireless Страницы: 20

Бренд: US Robotics Страницы: 2

Бренд: US Robotics Страницы: 16

Бренд: Conrad Страницы: 4

Бренд: Conrad Страницы: 4

DM111PSP - ADSL2+ Ethernet Modem

Бренд: NETGEAR Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды