manualshive.com logo in svg

Multitech SocketModem MT2456SMI-22, Руководство разработчика, Страница: 30 / 58

Поделиться
Скачать
Multitech SocketModem MT2456SMI-22 Скачать руководство пользователя страница 30

Chapter 4 - V.22bis Commands

Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide

30

\K

Break Control

Controls the response of the modem to a break received from the DTE or the remote modem or the \B command.
The parameter value, if valid, is written to S40 bits 3, 4, and 5.

Syntax

\K<value>

Defined Values

<value> Decimal number corresponding to the selected option.
The response is different in three separate states.
The 

first state 

is where the modem receives a break from the DTE when the modem is operating in data transfer

mode:

0 

Enter on-line command mode, no break sent to the remote modem.

1 

Clear data buffers and send break to remote modem.

2 Same 

as 

0.

3 

Send break to remote modem immediately.

4 Same 

as 

0.

5 

Send break to remote modem in sequence with transmitted data. (Default)

The 

second case 

is where the modem is in the on-line command state (waiting for AT commands) during a data

connection, and the \B is received in order to send a break to the remote modem:

0 

Clear data buffers and send break to remote modem.

1 

Clear data buffers and send break to remote modem. (Same as 0.)

2 

Send break to remote modem immediately.

3 

Send break to remote modem immediately. (Same as 2.)

4 

Send break to remote modem in sequence with data.

5 

Send break to remote modem in sequence with data. (Same as 4.) (Default)

The 

third case

 is where a break is received from a remote modem during a non-error corrected connection:

0 

Clears data buffers and sends break to the DTE.

1 

Clears data buffers and sends break to the DTE. (Same as 0.)

2 

Send a break immediately to DTE.

3 

Send a break immediately to DTE. (Same as 2.)

4 

Send a break in sequence with received data to DTE.

5 

Send a break in sequence with received data to DTE. (Same as 4.) (Default)

Result Codes

OK 0 to 5
ERROR Otherwise

Содержание SocketModem MT2456SMI-22



























































Отзывы:

Нет отзывов