Multitech MultiVOIP MVPGK1 Gatekeepers, Руководство пользователя по оборудованию

Страница: 15 / 87

MultiVOIP Gatekeeper User Guide
15
Chapter 2 - Installation & Setup
6.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be
a remote risk of electrical shock from lightning.
7.Do not use the telephone to report a gas leak in the vicinity of the leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunications line cord.
Rack Mounting
Caution : To prevent personal injury or damage to the unit, two people should mount the
Gatekeeper into the rack enclosure.
The Gatekeeper fits in a standard 19-inch rack enclosure. Attach it securely to the rack enclosure with
the four mounting screws included in your Gatekeeper kit.
When mounting the equipment in the rack, make sure the mechanical loading is even. Uneven
mechanical loading creates the risk that the equipment rack may tip or fall or present other related
hazards. The rack should safely support the combined weight of all the equipment that it holds.
Note : To keep the server cool enough, you need at least one inch of clearance behind the unit
to allow air flow. If mounted in a rack enclosure or as a desktop unit, there must be a
minimum of one inch between the back of the Gatekeeper and any wall or barrier.
Cable Connections
The operator need only connect the Network Interface Card to the local area network.
The SBC board has cable connectors for adding a keyboard, a monitor, and a mouse or other serial
device (on COM1). Cable connectors and boards are shown in Figure 2-1.
120
Cover Mounting
Screws
Cover
Network
Interface
Card
COM 2
(DB15)
Printer Port
(DB25)
SBC Backplane
Power Supply
100M LINK ACT
Figure 2-1. Back Panel Connectors