Multitech MultiVOIP 400 MVP400, Быстрый старт

Страница: 32 / 48

MultiVOIP Quick Start Guide
32
5. The Channel Setup dialog box displays. The Channel
Setup dialog box defines the channel interface, voice
coder, fax parameters, and regional telephone parameters
for each channel.
Configure each channel for the type of interface you are
connecting to. To change the channel number, select the
channel you want to configure from the
Select Channel
list .
6. The Interface group defaults to FXS (Loop Start) . Select
the interface option to correspond to the interface type
being connected to the Voice/Fax connector on the back
panel of the MultiVOIP.
If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System
(KTS) to the Voice/Fax connector on the back of the unit,
FXS (Loop Start) will likely be the correct Interface option
most of the time.