Chapter 3 – Using the Web Management Software
32
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Example 3 – Set Up the Ethernet Router to Activate on ALL Incoming Calls
1.
On the
PPP >PPP Configuration
screen, set up the following parameters:
PPP General
●
Make sure that
PPP
is
Enabled
.
●
Make sure
Dial-on-Demand
is
Enabled
.
●
Set the
Idle Time Out
to the number of seconds you desire.
Authentication
●
Your wireless service provider may require you to have a separate PPP
User name
and
Password
. If
so, enter them here.
Note:
If a user name and password are required, your wireless provider would have given them to you when
you activated your account.
Modem Configuration
●
Make sure your
Dial Number
is entered correctly: The Dial Number is
*99***1#
Submit
●
Click the
Submit
button to save the changes made on this screen.
2.
On the
PPP > Wakeup-on-Call
screen, set up the following parameters:
Wakeup-on-Call Configuration
●
Select
Enable
for
Wakeup-on-Call
.
●
Set the
Time Delay
to
3
seconds. You can use the 10 second default.
●
All
Init Strings
should be empty.
●
Submit
Button
Click the
Submit
button to save these settings.
Caller ID Configuration
●
Enter the string
RING
to the Caller ID list.
●
Click the
Add
Button to save the string to the Caller ID list.
3. Save and Restart
Click
Save and Restart
once you have completed and submitted all the screens on which you have made
changes. The device will save all the settings and reboot the PC.