Chapter 2 – Activation and Installation
4.
The
Internet Protocol (TCP/IP) Properties
screen.
Important Note:
If this screen opens and displays your current IP configuration, we suggest you record this
information for future reference (i.e., after the router is configured, you may wish to return
this PC to its original settings).
●
To set a Fixed IP Address for the pc, select
Use the following IP address
.
●
Enter the pc
IP Address
. Example: 192.168.2.x.
Note
: The
x
in the address stands for numbers 101 and up.
●
Enter the pc
Subnet Mask
. Example: 255.255.255.0
●
Enter the pc
Default Gateway
. Example: 192.168.2.2
Note:
The pc settings must be in the same subnet range as the router.
The factory default settings for the router are:
IP Address:
192.168.2.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.2.2
●
Select
Use the following DNS server addresses.
●
Enter the IP Address for the
Preferred DNS Server
. Example: 205.171.3.65
●
Click
OK
.
●
Close the
Local Area Properties
screen by clicking
OK
.
●
Close the
Control Panel
.
●
Repeat these steps for each PC on your network.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
15