manualshive.com logo in svg

Multitech MultiModem rCell MTCBA-E-EN2, Руководство пользователя, Страница: 2 / 58

Поделиться
Скачать
Multitech MultiModem rCell MTCBA-E-EN2 Скачать руководство пользователя страница 2

Copyright and Technical Support 

2 

Multi-Tech Systems, Inc. MultiModem rCell User Guide

 

MultiModem® rCell

 

User Guide 

Intelligent Wireless Router

 

MTCBA-H-EN2 & MTCBA-E-EN2 
S000456A, Revision A 

Copyright 

This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech 
Systems, Inc. All rights reserved. 

Copyright © 2009 by Multi-Tech Systems, Inc. 

Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims 
any implied warranties of merchantability or fitness for any particular purpose.  
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in 
the content hereof without obligation of Multi-Tech Systems, Inc., to notify any person or organization of such revisions or 
changes. Check Multi-Tech’s Web site or product CD for current versions of our product documentation. 

Record of Revisions 
Revision  

Date 

  Description 

  A 

05/26/09 

Initial release.  

Trademarks 

Trademarks and registered trademarks of Multi-Tech Systems, Inc. include MultiModem, the Multi-Tech logo, and Multi-Tech. 
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. All other products or 
technologies referenced in this manual are the trademarks or registered trademarks of their respective holders. 

World Headquarters 

Multi-Tech Systems, Inc. 
2205 Woodale Drive 
Mounds View, Minnesota 55112 
Phone: 763-785-3500 or 800-328-9717 
Fax: 763-785-9874 
Internet Address: 

http://www.multitech.com

 

Technical Support  

Country 

By Email 

 By Phone 

Europe, Middle East, Africa:  

[email protected]

 

+(44) 118 959 7774 

U.S., Canada, all others:  

[email protected]

 800-972-2439 

or 

763-717-5863 

Warranty  

Warranty information can be found at: 

http://www.multitech.com  

 

Содержание MultiModem rCell MTCBA-E-EN2



























































Отзывы:

Нет отзывов