manualshive.com logo in svg

Multitech MultiModem rCell MTCBA-E-EN2, Руководство пользователя, Страница: 19 / 58

Поделиться
Скачать
Multitech MultiModem rCell MTCBA-E-EN2 Скачать руководство пользователя страница 19

Chapter 2 – Activation and Installation 

Important Note About Provider Fees 

Your provider will charge you for your data usage. Please check with your provider to make sure you are 
aware of the charges.  

If you plan to use the router for large amounts of data transfers, Multi-Tech recommends an unlimited data 
plan with your account. Multi-Tech will not be responsible for any charges relating to your cellular bill. 

Note:  Additional features and functions can be set up using the complete Web Management software 
program, described in Chapter 3. 

6. 

Click the

 Submit

 button. 

7. 

Click the Save & Restart button (located on the Menu bar).  The router will reboot 

IMPORTANT NOTE ABOUT 

SUBMIT

 AND 

SAVE & RESTART 

 

Multi-Tech Systems, Inc. MultiModem rCell User Guide 

 

19

 

 

 

 

8. 

The Status LED will go out during a ‘Save & Restart’. Once it is flashing, the unit is ready to go. 

9. 

Open a Web browser. You are now connected to the Internet. 

Set Time and Date 

The date and time must be set using the Web Management software.  
The time and date set in 

IP Setup

 will not be correct unless SNTP client is enabled and you have a live Internet 

connection. See SNTP client. 

Shutdown Caution 

Click the 

Submit

 button located at the bottom of most screens in order to save any changes you make. 

Then you click the 

Save & Restart

 button, located on the Menu bar, in order for your settings to take 

effect. 

Save & Restart

 does not have to be executed after each screen; you can change and Submit 

several screens, and then click 

Save & Restart

. 

Never unplug the power until you have first performed the 

Save & Reset

 process. If the 

setup changes are not properly saved before unplugging the power, data could be lost. 

 

Содержание MultiModem rCell MTCBA-E-EN2



























































Отзывы:

Нет отзывов