Multitech MultiModem MT5634ZPW-PCI, Руководство пользователя

Страница: 83 / 94

MT5634ZPW-PCI
83
Appendices
Except at the edge connector which plugs into the host's
expansion slot, clearance distance (Xmm) and creepage
distance (Ymm), as given in the above table, must be
maintained between the communication card and any
assemblies which use or generate hazardous voltage.
This apparatus has been approved for the use of the following
facilities:
• Auto-calling
• Loop disconnect and MF dialing
• Phone number storage and retrieval by a predetermined
code
• Operation in the absence of proceed indication
• Detection of initial and secondary proceed indication
• Automatic storage of last number dialed
• Tone detection-busy
• Auto clear from the originating end
• Modem
• PBX timed break register recall
European Low Voltage Directive
When correctly installed and maintained, the modem will present
no hazard to the user. When correctly installed the modem will
be connected to the PSTN or a PW and to a Data Terminal
Equipment (DTE), whose modem connections comply with ITU-
T recommendation V.28. The DTE connections are therefore
taken to be safe voltages (less than ± 30 volts).
Ports which are capable of connecting to other apparatus are
defined as SELV. To ensure conformity with EN41003, ensure
that these ports are only connected to ports of the same type on
other apparatus.