Multitech MultiModem MT5634ZPW-PCI, Руководство пользователя

Страница: 21 / 94

MT5634ZPW-PCI
21
2 Installation
Installing Drivers
1. Plug in and turn on your computer. As your computer boots,
it automatically detects the MultiModemZPW-PCI, and the
New Hardware Found dialog box appears.
2. In the New Hardware Found dialog box, select “Driver from
disk provided by hardware manufacturer” (the default
selection). Then click the OK button. The Install from Disk
window appears.
3. Insert the MultiModemZPW-PCI Drivers disk into your
computer's floppy drive, select the drive letter (A:\ is the
default), and click on the OK button. The computer installs
the software drivers needed to communicate with your
MultiModemZPW-PCI, then displays the Windows 95
desktop.
4. Installation of the MultiModemZPW-PCI is complete. If you
plan to use the provided communications software, install it
now according to the instructions provided in your
corresponding software manual.
Is Your MultiModemZPW-PCI Ready for Use?
If you’re an experienced modem user, you may simply want to
check your modem’s settings for data compression, error
correction, and so on. You may find that you can get moving
quite quickly if you just issue the
AT&V<cr> command. This
command lists how your modem is currently configured, the
stored (user) profiles, and the four stored telephone numbers. If
you come across a setting you’re unsure of, refer to Chapter 3 of
this manual for AT command and S-Register explanations and
defaults.
If you’re a novice, please continue to the next sections of this
chapter.