Software/Driver Installation
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
61
NetWare Connect (Novell) Driver Installation
{2S/2U models only}
Multi-Tech Systems provides AIO
drivers for the ISIHP-2S/2U, so it
can function with Novell compatible asynchronous applications (e.g.,
NetWare Connect). The AIO driver is simply an NLM (NetWare
Loadable Module) that runs on the file server. Drivers must be loaded
on the file server where the board is installed. Drivers can be loaded
from the file servers console prompt or incorporated for autoloading
in the AUTOEXEC.NCF file.
To install the Multi-Tech AIO driver, copy the file
AIOISIX.NLM
to
the system directory of the file server from a workstation on the
network. To copy, you can use the following command:
COPY A:\NOVELL\AIOISIX.NLM F:\SYSTEM
To load the driver, go to the system or PC console (where the ISIHP-
2S/2U is installed) and enter the following at the prompt:
LOAD AIOISIX [port=W] [int=X] [name=Y] [note=Z]
To install the ISIHP scripts, copy
aiomdms.mdc
to
f:\system\aio\directory
. Click
Yes
to overwrite the existing
aiomdms.mdc file.
Configuring Ports for NetWare Connect
To set up NetWare Connect ports, enter
LOAD NWCCON
at the
NetWare console prompt. LOAD NWCCON opens the NetWare
Connect Configuration Utility. Select the appropriate menu options
(modem type, speed, flow control, etc.)
Removing the Driver (Novell)
In Novell, remove file AIOISIX.NLM from the system directory and
make the appropriate changes to the
Autoexec.ncf
file.
All manuals and user guides at all-guides.com
all-guides.com