Multitech MultiModem ISI ISI3334/4 Скачать руководство пользователя страница 2

Страница: 2 / 48

Quick Start Guide

82085401 Revision B 8/25/00

ISI3334-4/8

This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech

Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof

without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.

Revision

Description

Manual released at Revision A,

7/15/98

Revised for universal ISI drivers, Rev B. 8/25/00.

Trademarks of Multi-Tech Systems, Inc.:MultiModem, MultiModemISI, Multi-Tech and the Multi-Tech logo.

MNP, Microcom Network Protocol is a trademark of Microcom Inc.

AT&T is a trademark of American Telephone and Telegraph Co.

UNIX: X/Open Co. Ltd.

MS-DOS: Microsoft Corporation

SCO: The Santa Cruz Operation, Inc.

Pentium: Intel Corporation

PC-DOS: International Business Machines Corporation

Novell, NetWare, NetWare Connect and UNIXWare: Novell Corporation

Xenix:Xerox Corporation

All brand and product names mentioned in this publication are trademarks or registered trademarks of their respective

companies.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

U. S. FAX 763-785-9874

Technical Support (800) 972-2439

Internet Address:

http://www.multitech.com

Содержание MultiModem ISI ISI3334/4

















































Результаты поиска

Содержание MultiModem ISI ISI3334/4

Отзывы:

Похожие инструкции для MultiModem ISI ISI3334/4

Бренды по названию

Популярные бренды

Multitech MultiModem ISI ISI3334/4, Быстрый старт

Результаты поиска

Содержание MultiModem ISI ISI3334/4

Отзывы:

Похожие инструкции для MultiModem ISI ISI3334/4

Бренды по названию

Популярные бренды