background image

Chapter 1 – Product Description and Specifications  

Multi-Tech Systems, Inc. MultiConnect AW User Guide 

 

 

MT100A2W  

Category 

Description 

Command Connector 

DE9 (female connector) 

Modem Connector 

DE9  

Dial Connector 

RJ11 

Power Connector 

2.5mm miniature screw-on 

Voltage Range 

9V to 32VDC @ 400mA 

Power Requirements* 

Typical:

 0.156A @ 9V   @ 1.404W          

Max:  

0.233A  @ 9V   @ 2.097W  

               0.078A @ 20V @ 1.560W                    0.113A   @ 20V @ 2.260W  
               0.053A @ 32V @ 1.696W                    0.076A   @ 32V @ 2.432W   

Dimensions 

7” W x 1.24”H x 2.79”D  .70lbs    17.78cmW x 3.15cmH x 7.07cmD   0.318Kg 

Operating Temperature** 

-40° C to +60° C   UL listed @ +40° C  

Storage Temperature 

-40° C to +85° C   

Humidity 

Relative humidity 20% to 90% noncondensing  

Compliance

 

EMC Compliance 

       

FCC Part 15 

      EN55022 
      EN55024 

 Safety:

  UL60950-1 

cUL60950-1  
EN60950-1   

 
 
*   Multi-Tech Systems, Inc recommends that the customer incorporate a 10% buffer into their power 

source when determining product load. 

** 

UL Listed @ 40°C. Limited by power supply.  UL Certification does not apply or extend to an ambient above 40°C 
and has not been evaluated by UL for ambient greater than 40°C 

** 

“UL has evaluated this device for use in ordinary locations only. Installation in a vehicle or other outdoor locations 
has not been evaluated by UL. UL Certification does not apply or extend to use in vehicles or outdoor applications or 
in ambients above 40° C.” 

** 

Optional power must be UL Listed ITE power supply marked LPS or Class 2 rated 9-32Vdc, 1.44 – 0.4A 

 

 

Содержание MultiConnect MT100A2W





































Отзывы: