Chapter 3 – Configuration of your MultiConnect
CDMA Cellular Network Configuration
When an external Multi-Tech CDMA modem is connected to the MODEM port of a MT100A2W unit and the unit is
powered up, the Device Configuration menus will default to a CDMA Cellular Network.
1.
The CDMA Cellular Port menu is displayed.
2.
Configure options A thru D depending on your CDMA cellular network.
CDMA Network Dependent
Option
Default
Description
A) CDMA
CDMA No
selection
B) Protocol
TCPClient
Select either TCPClient, Telnet, UDP,
or Pass Thru
C) Inbound or
Outbound
Outbound
Select either
0) Auto Detect which automatically
detects between inbound and outbound,
1) PPP Client (Outbound),
2) PPP Client Inbound (Listening).
D) Wireless
Connection
OnDemand
Select either OnDemand or Always On
ATTENTION:
If Always On is desired,
wait until you have made all your other
configuration changes before selecting
this option.
3.
When you change the Remote Port or Remote IP, they become the new default without pressing the + key
to save the configuration.
Port Dependent
Option
Default
Description
E) Local Port
23
The Local Port is for inbound
communications
F) Remote Port
0
TCP/IP port that remote device is
listening on.
G) Remote IP
None
IP address of remote device on the
network you are connecting to.
Multi-Tech Systems, Inc. MultiConnect AW User Guide
18
4.
You need to save your configuration by pressing the + key. Then return to the Main Device Configuration
menu and wait for the cellular wireless network and the analog modem to change to a READY state. The
Current Settings will change to: (State WIRELESS_READY) (State ANALOG_READY).
Initial configuration of the CDMA Version is complete.
