Multitech CommPlete CC9600, Руководство пользователя

Страница: 18 / 26

CC9600 Chassis User Guide
8 CommPlete Communications Server
Connections
The rear of the CommPlete Communications Server provides connections to power, communications
lines, and configuration hardware, as shown in Figure 2. Only the power connectors are part of the CC9600
chassis. The other connectors are mounted on removable cards or modules, and are documented in their
respective user guides.
Figure 2. CommPlete Communications Server connectors.
WARNING:
Both power cords must be removed to remove all power from the chassis. The power supplies
are connected in parallel, so that both power supplies supply power to all power busses in the chassis. To
remove all power from the left power supply, disconnect the left power cord; to remove all power from the
right power supply, disconnect the right power cord.
10BaseT Ethernet connector to
external concentrator (SELV) 10Base-T Ethernet connector to server NIC (SELV)
DB-9P RS-232C connector for configuring
controller (SELV)
AC power (2×)
5 V test point (SELV)
5 V adjust (2×)
RJ-48 T1 connector
(TNV) (4×)
T1 monitor connectors
(TNV) (4×)
RJ-11 T1 alarm connector
(SELV) (4×)
DB-9P COM1 connector
(SELV) (4×)
DB-15S video connector
(SELV) (4×)
Keyboard connector
(SELV) (4×)
0 V test point (SELV)