Operating Instructions
MULTIflight
Stick
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • 75015 Bretten (Gölshausen) • Germany • www.multiplex-rc.de Page 2/2
Operat
ing inst
ruct
ions for
MULTIflig
ht stic
k
#
985
533
9 (P
C 1
3
/08
/201
3)
•
Errors
and om
is
sions excepted
.
•
©
M
U
LT
IP
LEX
PROFI TX
If you prefer to use only the stick signals for controlling,
configure the parameters in the "Setup
Æ
Training" menu
as follows:
¡Training
¨Exit
Training
ON
Binding
MULTIflight
Format
UNI
Mode
Student
If you would like to use trim, Expo, etc. create a new
model in the "Memory" menu using the BASIC template
and select a suitable controls assignment. Change the
model name to "Simulator".
Other transmitters
The MULTIflight stick receives the servo channels of your
radio control like a receiver. Configure your radio control
as follows: servo format UNI, no mixers, all servo travels
set to 100%. You can use Expo, dual rate, and trim as
usual. Optionally, you can calibrate the simulator for your
radio control.
Refer to the FAQ area on our website for more detailed
information. The FAQ area can also be accessed via the
Help menu of the simulator.
4.
EC
DECLARATION OF CONFORMITY
This device has been assessed in accordance
with the relevant harmonised European
directives.
You are therefore the owner of a product whose design
fulfils the protective aims of the European Community
relating to the safe operation of equipment.
The detailed EC declaration of conformity is available as a
PDF file online at
www.multiplex-rc.de
under PRODUCT
INFORMATION in the DOWNLOADS area.
5.
D
ISPOSAL
Electrical equipment marked with the crossed out
wheeled bin symbol must not be disposed of in
the standard household waste, but must instead
be taken to a suitable disposal system.
In the countries of the EU (European Union),
electrical equipment must not be disposed of via the
household or residual waste system (WEEE - Waste of
Electrical and Electronic Equipment, directive
2002/96/EC). You can take unwanted equipment to your
nearest local authority waste collection point or recycling
centre free of charge. There, your equipment will be
disposed of correctly and at no cost to you.
By returning your unwanted equipment you can make an
important contribution to protecting the environment.
6.
W
ARRANTY
/
LIMITATION OF LIABILITY
MULTIPLEX Modellsport GmbH & Co.KG does not
assume any liability for loss, damage or costs which arise
through the improper use and operation of our products,
or which are connected with such operation in any way.
As far as is legally permissible, the obligation of
MULTIPLEX Modellsport GmbH & Co.KG to provide
compensation for damages, on whatever legal basis, is
limited to the invoice amount of the quantity of
MULTIPLEX Modellsport GmbH & Co.KG goods that were
directly affected by whatever incident gave rise to the
damage. This does not apply if MULTIPLEX Modellsport
GmbH & Co.KG is obliged to accept unlimited liability in
accordance with mandatory law for deliberate or gross
negligence.
Our products are covered by the currently valid statutory
warranty regulations. If you wish to make a claim under
warranty, please contact the model shop where you
purchased the product.
The warranty does not cover malfunctions caused by the
following:
•
Improper
operation
•
Maintenance that was performed incorrectly, late or
not at all, or performed by a non-authorized body
•
Incorrect
connections
•
Use of non-original MULTIPLEX accessories
•
Modifications / repairs that were not carried out by
MULTIPLEX or a MULTIPLEX Service Centre
•
Accidental or deliberate damage
•
Faults due to normal wear and tear
•
Operation outside the technical specifications or in
connection with components from other manufacturers
