manualshive.com logo in svg

Multiplex 21 4193, Инструкция по сборке, Страница: 23 / 52

Поделиться
Скачать
Multiplex 21 4193 Скачать руководство пользователя страница 23

23

GB

# 21 4193

Examine your kit carefully!

MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts 

before

 you start construction,

as

we cannot exchange components which you have already worked on

. If you find any part is not acceptable for any

reason, we will readily correct or exchange it. Just send the component to our Model Department. Please be 

sure

 to include the

purchase receipt and a brief description of the fault.

We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.

Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at
the flying field. Errors and carelessness in building and flying the model can result in serious personal injury and
damage to property. Since we, as manufacturers, have no control over the construction, maintenance and operation of
our products, we are obliged to take this opportunity to point out these hazards and to emphasise your personal
responsibility.

Additional items required:
For the electric and glow powered models:
Receiving system (in the model)

MULTIPLEX 

Micro IPD 

receiver

35 MHz A-band

Order No. 

5 5971

alternatively:

40 MHz band

Order No. 

5 5972

or

MULTIPLEX 

RX-9 Synth DS IPD 

receiver

35 MHz A-band

Order No. 

5 5890

MULTIPLEX 

Mini HD 

servo, 3 x (4 x for glow version)

Elevator / Rudder / Aileron / Throttle

Order No. 

6 5123

Additional items for the electric version:
Power set:

MULTIPLEX 

680G electric power set

Order No. 

33 2668

Permax 680/8.4 V, 3:1 gearbox (600 DP), propeller adaptor, spinner and propeller

Speed controller

:

MULTIPLEX 

PiCO-Control 400 Duo

Speed controller

Order No. 

7 5024

Flight battery

:

MULTIPLEX 

Permabatt

 NiMH flight pack

8/3000 mAh

Order No. 

15 6027

Additional items for the glow version:

MULTIPLEX 

Permabatt

 NiMH receiver battery 4/1500 mAh

Order No. 

15 6007

MULTIPLEX switch harness with charge socket, black

Order No. 

8 5039

Two-stroke motor, approx. 5 cc (.25 - .36 cu. in.)

or

Four-stroke motor, approx. 6.5 cc (.26 - .30), weight no greater than approx. 300 g!
Propeller, spinner, fueltank, electric starter, fuel and glowplugs.

Adhesives: cyano-acrylate (“cyano”) and activator; 5-minute epoxy

Use medium-viscosity cyano glue (not styrofoam cyano). It is important to use activator when using cyano. Epoxy adhesives
produce what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away from the parts
under load.

Tools:

Scissors, balsa knife, combination pliers, 2.5 and 4 mm Ø twist drills, cross-point screwdriver, small round file.

Specification:

Wingspan

1630 mm

Fuselage length

1170 mm

All-up weight, electric

680 motor / 8 x SC cells

approx. 2380 g

All-up weight, glow

approx. 5 cc motor

approx. 1950 g

Wing area

approx. 45 dm²

Wing loading (FAI)

approx. 53 g/ dm²

RC functions

Aileron, elevator, rudder and motor; optional aero-tow release

Note

: please remove the illustration pages from the centre of the instructions.

Содержание 21 4193





















































Отзывы:

Нет отзывов