Multicomp-pro
16
6.
Set the relative value.
Press the Rel softkey to turn on or off the relative operation. For relative operation,
the multimeter subtracts the pre-specified value of REL operation from the actual
measurement result and displays the result. See page 28,
Measuring DC Current
This section describes how to configure DC current measurements.
Operating Steps:
1.
Enable the DCI measurement.
Press
on the front panel to enter DCI measurement mode.
2.
Set the function.
Press the Function softkey to switch between A and mA.
3.
When the Function is set as
A
, connect the test lead as below.
When the Function is set as
mA
, connect the test lead as below.
DC Current
DC Current