background image

6. REPAIR SERVICE

When requesting for repair service, please bring the instrument directly to the dealer 
where you bought. 
When mailing the instrument, always pack it in its original or equivalent. 
Packing materials to avoid any damage during the transportation and also put 
together 
with documents showing your name, address, phone number and defect point. 

7. WARRANTY

This instrument is sent out from our factory after the sufficient internal inspections 
but if you find any defect due to the fault in our workmanship or the original parts, 
please contact the dealer where you bought the instrument. 

The warranty period is 12 months from the date of purchase and the instrument shall 
be repaired at free of charge, provided that we judge the cause of defect is obviously 
resulted from our responsibility. 

GURANTEE REGULATIONS 

1.

 

This instrument is warranted for the operation under normal use for 12 months from

the date of purchase.

2.

 

This warranty does not cover the following defects:
a. Defect caused from the improper use and operation.
b. Defect caused from the use, operation and storage beyond the original

specifications, designs and conditions.

c. Defect caused from the renovations or repairs done by someone else than us or our

representatives.

d. Defect not caused from our responsibilities.

Содержание MCL-400IR















Отзывы: