Multi-Link Versa-Link ATX-250 Скачать руководство пользователя страница 29

FCC REGISTRATION

WARRANTY AND

SERVICE INFORMATION

FCC REGISTRATION

This equipment complies with Part 68 of

the FCC rules. On the bottom of this

equipment is a label that contains, among
other information, the FCC Registration

Number and Ringer Equivalence Number

(REN) for this equipment. You must, upon

request, provide this information to your

telephone company.

The REN is useful to determine the

quantity of devices you may connect to

your telephone line and still have all of

those devices ring when your telephone

number is called. In most, but not all

areas, the sum of the RENs  of all devices
connected to one line should not exceed

five (5.0). To be certain on the number of

devices you may connect to your line, as
determined by the REN, you should
contact your local telephone company to
determine the maximum REN for your

calling area.

If your telephone equipment causes harm

to the telephone network, the telephone

company may discontinue your service

temporarily. If possible, they will notify you

in advance. But if advance notice isn’t
practical, you will be notified as soon as
possible. You will be informed of your
right to file a complaint with the FCC.

Your telephone company may make
changes in its facilities, equipment,
operations or procedures that could

affect the proper functioning of your

equipment. If they do, you will be notified

in advance to give you an opportunity to

maintain uninterrupted telephone service.

If you experience trouble with this

telephone equipment, please contact your
Versa-Link dealer or Multi-Link, Inc. for

information on obtaining service or
repairs. The telephone company may ask

that you disconnect this equipment from
the network until the problem has been

corrected or until you are sure that the
equipment is not malfunctioning.

This equipment may not be used on coin
service provided by the telephone

company, and is not intended for use with

party line service. This equipment is
intended for use only on loop-start

service, and will not operate on a ground-

start central office line.

L I M I T E D   W A R R A N T Y

We warrant that if this Versa-Link ATX-
250 product, manufactured by Multi-Link,

Inc. and purchased by you, proves to be

defective in material or workmanship, we

will provide without charge, for a period

of two (2) years, the labor and the parts
necessary to remedy any such defect.
Warranty period commences on the date
of purchase by the original retail
consumer.

The duration of any implied warranty of

merchantability, fitness for a particular
purpose, or otherwise, on this product

shall be limited to the duration of the
applicable express warranty set forth
above. In no event shall we be liable for
any loss, inconvenience or damage

VERSA-LINK ATX-250

27

Содержание Versa-Link ATX-250
































Отзывы: