USER SELECTABLE
F E A T U R E S
6 . 2 C A L L O P T I - M I Z E R
6 . 3 P R O T E C T E D H O O K
CALL OPTI-MIZER is useful if you want
all incoming calls to go to DEVICE 2
when your office is unattended. See
section 4.2.3
for a detailed description.
When using CALL OPTI-MIZER, there
are three choices for the parameters that
determine when a call is sent to DEVICE
2. CALL OPTI-MIZER can also be
completely disabled. Set the configuration
switches 3 and 4 according to the
following table.
F L A S H
Some key tone telephone systems do not
allow tone generation on an inbound call.
On these systems, manual transfers can
still be accomplished by fooling the
telephone system into thinking it is
making an outbound call. This is done by
pressing the “FLASH” key on the
telephone, and then dialing the device
code for DEVICE 2.
Remember to unplug and re-connect the
AC power after changing the
configuration switches.
For example, if your FAX is connected to
DEVICE 2, and the device selection code
for DEVICE 2 is
*
2
,
calls can be
manually transferred to the FAX by
pressing FLASH and then
*
2
To prevent the caller from being hung up
when the FLASH key is pressed, you will
want to activate Protected Hook Flash.
This will place the call on hold while the
flash button momentarily disconnects the
line. Protected Hook Flash cannot be
used if your phone is pulse-dial or if this
line has “call waiting”.
NO.
OF
NO.
OF
CONFIGURATION RINGS TO RINGS TO
SWITCHES ACTIVATE
DEVICE 1
3 4
NIGHT IN NIGHT
FUNCTION FUNCTION
5 2
4 2
3
1
IS OFF) IS OFF)
Configuration switch 5 is used to select
Protected Hook Flash. Remember to
unplug and re-connect the AC power
after changing the configuration switch.
PROTECTED
HOOK FLASH
VERSA-LINK ATX-250
2 0
