USER SELECTABLE
FEATURES
6 . 4
F A X T O N E
D E T E C T I O N
If you connect
a FAX machine to your
network, you will need to tell your
ATX-
250 which
DEVICE
port it is on.
This
allows auto-dial FAX calls to be
transferred to your FAX machine
automatically.
If you adding FAX to a voice line, connect
the FAX to DEVICE 2.
If you are expanding a FAX line, connect
the FAX to DEVICE 1.
Configuration switch 6 is used to select
FAX
tone detection. Remember to unplug
and re-connect
the
AC
power after
changing the configuration switch.
FAX TONE
detection
6
6
(FAX ON DEVICE 2)
OFF (NO FAX OR FAX ON DEVICE 1)
6 . 5 S E L E C T I V E R I N G I N G
F E A T U R E W I T H
T R A N S F E R
The “Selective Ringing” feature
on your
ATX-250
is
designed to be used in
conjunction with the “distinctive ring”
service offered by your local telephone
company.
In the “selective ring” mode, your
ATX-
250 will detect the multiple ring patterns
associated with each telephone number
and route the call to the intended phone
device. Switching is completely transpar-
ent to the caller.
“Selective Ringing” can be enabled by
simply placing all DIP Switches in, the up
position as indicated below-and recycling
power.
IMPORTANT: Configuration switch changes
are not activated until AC power is re-applied
Therefore unplug and re-connect the AC
power cord after making any configuration
switch changes lo enter these settings into
memory
Manual Transfer -
In “Selective Ringing”
mode your
ATX-250 has the same basic
manual transfer capability as with normal
function. To transfer calls to a selected
device, enter the proper device selection
code on your telephone key pad (or other
equipment). The factory settings are:
Device Selection Codes
DEVICE 1
or
21
DEVICE 2
or
22
6 . 6
F A C T O R Y
S E - I - I - I N G S
When your ATX-250 was shipped to you,
it was programmed with the following
settings:
DEVICE
IDEVICE 1
*
1
SELECTION
CODES
CALL OPTI-MIZER
OFF
PROTECTED HOOK FLASH OFF
FAX TONE DETECTION ON
VERSA-LINK ATX-250
21
