1. Open the battery compartment
at the rear of the mobile switch
remote control.
2. Insert 1 CR 2450 / 3 V battery
as shown on the bottom of the
battery compartment. Ensure
the correct polarity of the
batteries (+/-).
3. Close the battery compartment
cover again.
Inserting the batteries
tint-BULB + MOBILE SWITCH
INSTRUCTION MANUAL
27
Using the wall bracket (optional)
You can use the wall bracket (supplied) to store the mobile switch remote control safely.
A magnet in the bracket will hold the mobile switch remote control safely in the bracket.
The bracket can be mounted on a surface of your choice with adhesive strips or screws
and wall plugs if required.
The bracket will still attract metal objects, even without any adhesive or screws.
Mounting the wall bracket
1. Remove the protective film from both sticky pads.
2. Press the bracket with some force against a clean, dry and dust-free surface.
6
Reset button
7
Battery
compartment
for 1 battery
CR 2450 / 3 V
