Setup
Fitting the bulbs
You can insert the supplied bulb into different fittings, e.g. into a
ceiling light and a free-standing lamp or a desk lamp. The only
requirement is that the lights each have a suitable E27 socket.
1. Switch lamps off and unplug them from the mains (where
applicable) and/or switch off the fuse for the room at the fuse box.
2. Allow previously inserted bulbs to cool when necessary.
3. Remove the old bulbs and screw the new bulbs into the sockets.
4. Plug the lamp back in at the mains and/or switch the house fuse back on and set the
switch to I or ON.
tint-mobile switch
tint-BULB + MOBILE SWITCH
26
INSTRUCTION MANUAL
1
Standby
button
3
Brightness
control
4
Favorite
button
2
Feedback display
5
Battery
compart-
ment
