6
Connecting and configuring external devices
External lightbar
40
V9.20191001
31302713-02-US
External lightbar
Connecting the external lightbar to the display
The external lightbar is a parallel guidance display made by Müller-Elektronik, which can be mounted
near the windshield.
The external lightbar works with position data and guidance lines that are provided by the TRACK-
Leader app. This is why you need the TRACK Leader App to be able to use the external lightbar.
External lightbar
Plug for connection to the display
Plug for connecting a GPS receiver
Serial port
Activating an external ME LightBar
If you connected an external LightBar to the display, you must activate it.
To activate the external LightBar, you must first activate its driver.
You can order the external ME Lightbar from Mueller-Electronics with the following item number:
30302490.
1.
- Open the Service application.
2.
Tap "Driver".
3.
Tap "LightBar".
⇨
The installed drivers will appear.
4.
Tap "Lightbar".
5.
- Confirm.
6.
Restart the display.
Connecting the on-board integrated display/controller to the
display
You can connect a range of on-board integrated display/controllers (non-ISO computers), which
communicate using the LH5000 protocol or the ASD interface, to the display.
An appropriate connector cable for each on-board integrated display/controller which can be
connected is available from Mueller-Electronics. Our sales team will be glad to advise you.
6.5
6.5.1
6.5.2
Procedure
6.6
