Customer Service Center
Decatur, Illinois
800.423.1323
www.muellercompany.com/hydro-guard
The content of this manual is the sole and exclusive property of Mueller Co.
Unauthorized distribution or reproduction strictly prohibited.
WARNING:
Failure to read and follow the instructions contained within this manual
could result in serious personal injury, and/or damage to the Remote
Pressure Monitoring System.
1. Each person involved in the assembly, installation and/or maintenance
of the Hydro-Guard Remote Pressure Monitoring System must read
this manual carefully and follow all instructions prior to performing any
installation or maintenance procedures involving the Unit.
2. Be sure the corporation valve or other isolation valve is closed prior to
installation or removal of the pressure sensor.
3. Always use all necessary safety equipment and follow all recommended
procedures when installing, operating and maintaining the Hydro-Guard
Remote Pressure Monitoring System.
CAUTION:
When installing the Remote Pressure Monitoring System, ensure the known
pressure is less than 250psi. If pressure may exceed 250psi at identified
installation site, contact Mueller Co. for proper configuration.
Reliable Connections
TM
Remote
Pressure
Monitoring
System
2.1.1
o p e r at i n g i n s t r u c t i o n s m a n u a l
TABlE oF ConTEnTS PAGE
Installation and Site Evaluation
2-3
Installation and Operating Instructions
4
Operating Instructions
4-11
Battery Replacement and Technical
12
Troubleshooting and FAQ
13
Parts 14
Notes 15
HYDRO-GUARD
®
!
!
