MTU Detroit Diesel 12 V 2000 P62 Скачать руководство пользователя страница 99

Страница: 99 / 208

Task Description

6.3

Crankcase Ventilation

6.3.1

Crankcase breather – Wire mesh cleaning

Material

Designation / Use

Part No.

Qty.

Cleaner
Diesel fuel
Petroleum jelly

Spare parts

Designation / Use

Part No.

Qty.

Sealing ring

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid naked flames, electrical sparks and ignition sources.
• Do not smoke.

WARNING

Compressed air.

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

CAUTION

Excessive reaction time of cleaning agents on components.

Damage to component!

• Observe manufacturer’s instructions.
• Wear protective clothing, gloves, and goggles / safety mask.

Crankcase breather – Wire mesh cleaning

1. Remove hose.
2. Loosen clamp (5).
3. Remove oil separator cover (7).
4. Remove individual parts from oil separator

cover (7).

5. Wash filter element (wire mesh) (3) with diesel fuel.
6. Blow out filter element (wire mesh) (3) with

compressed air.

7. Clean residual parts with cleaner.
8. Remove cleaner.
9. Coat sealing ring (6) with petroleum jelly and insert

in groove in the oil separator cover (7).

10. Insert both holders (2, 4) and filter element (wire

mesh) (3) into the oil separator cover (7), ensuring

correct installation sequence.

11. Install oil separator cover (7) with clamp (5) on

cylinder head cover (1).

12. Install hose, ensuring that it is not subjected to

tension.

MS15009/00E 06-09

Содержание Detroit Diesel 12 V 2000 P62

















































































































































































































Результаты поиска

Содержание Detroit Diesel 12 V 2000 P62

Отзывы:

Похожие инструкции для Detroit Diesel 12 V 2000 P62

Бренды по названию

Популярные бренды

MTU Detroit Diesel 12 V 2000 P62, Техническая публикация

Результаты поиска

Содержание Detroit Diesel 12 V 2000 P62

Отзывы:

Похожие инструкции для Detroit Diesel 12 V 2000 P62

Бренды по названию

Популярные бренды