MTU 8V4000M*3 series, Руководство по эксплуатации

Страница: 125 / 260

371 – AL Wiring TO 1
ZKP-Number: 1.8004.634
Cause Corrective action
Short circuit or wire break on
transistor output 1 (TO 1). 1. Check charger valve/cabling, repair as necessary.
2. Replace engine governor
372 – AL Wiring TO 2
ZKP-Number: 1.8004.635
Cause Corrective action
Short circuit or wire break on
transistor output 2 (TO 2). 1. Check air recirculation valve/cabling, repair as necessary.
2. Replace engine governor
373 – AL Wiring TO 3
ZKP-Number: 1.8004.636
Cause Corrective action
Short circuit or wire break on
transistor output 3 (TO 3). u Check wiring of charger valve 2 (marine engine)
374 – AL Wiring TO 4
ZKP-Number: 1.8004.637
Cause Corrective action
Short circuit or wire break on
transistor output 4 (TO 4). u Check wiring of charger valve 3 (marine engine)
390 – AL MCR exceeded
ZKP-Number: 1.1085.009
Cause Corrective action
DBR/MCR feature: MCR
(maximum continuous rating) was
exceeded. 1. If the alarm occurs temporarily, no action required.
2. If the alarm is permanently active, contact Service.
396 – TD T-Coolant
ZKP-Number: 1.8004.626
Cause Corrective action
Maximum deviation of coolant
temperature values from sensors 1. Check sensor and cabling, replace as necessary.
2. Contact Service.
MS15034/00E 2018-08 | Troubleshooting | 123
TIM-ID: 0000018389 - 004