MTU 20V4000M93 series Скачать руководство пользователя страница 160

Страница: 160 / 275

Note:

Observe system pressure.

Slowly loosen union on HP line (4).

Remove HP line (4).

Note:

The fuel stored in the injector drains out
when the adapter (3) is unscrewed.

Unscrew adapter (3).

Note:

Components are sensitive.

Protect contact surfaces of HP line (4) and
adapter (3) on cylinder head and the HP line
(4) itself against damage.

Unscrew screw (2).

Install installation/removal jig on cylinder
head.

10.

Remove injector with installation/removal jig
and take off hold-down clamp.

11.

Remove installation/removal jig.

Note:

The sealing ring (4) for sealing the combus-
tion chamber must only be used once.

12.

Remove sealing ring (4) from injector or use a
self-made wire hook or magnet to take it out
of the cylinder head and dispose properly.

Note:

For new assembly:

13.

Dispose of injector with O-rings in place.

Note:

For repeated assembly:

14.

Remove O-rings (3), O-ring (2) and damper
ring (1) from injector.

15.

Clean all mating and sealing surfaces.

16.

Cover all connections and bores, or seal with
suitable plugs.

158 | Injection Valve / Injector | MS150048/05E 2018-03

TIM-ID: 0000000925 - 031

Содержание 20V4000M93 series




















































































































































































































































































Результаты поиска

Содержание 20V4000M93 series

Отзывы:

Бренды по названию

Популярные бренды

MTU 20V4000M93 series, Руководство по эксплуатации

Результаты поиска

Содержание 20V4000M93 series

Отзывы:

Бренды по названию

Популярные бренды