manualshive.com logo in svg

MTU 16V 4000 R43L, Руководство по эксплуатации

Поделиться
Скачать
MTU 16V 4000 R43L Скачать руководство пользователя страница 129

7.16.4 Replenishing engine coolant

Preconditions

☑

Engine shut down and secured against being restarted.

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Coolant

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

NOTICE

Cold coolant in hot engine can cause thermal stress.

Possible formation of cracks in the engine!
• Fill / top up coolant only into cold engine.

Preparatory steps

1.

Turn the valve cover (1) on the coolant ex-
pansion tank counterclockwise to the stop
and allow pressure to escape.

2.

Continue to turn valve cover (1) counter-
clockwise and remove.

MS15042/00E 2014-10

| Task Description | 129

TIM-ID: 0000006724 - 007

Содержание 16V 4000 R43L




































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды