9.
Coat bolt mating face (2) and thread with
engine oil.
10.
Fit hold-down clamp (1) in the correct position and use torque wrench to tighten screw (2) to the speci-
fied initial tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Preload torque
(Engine oil)
5 Nm to 10 Nm
Note:
Ensure special cleanness.
11.
Coat thread and sealing cone of adapter (3) with engine oil.
12.
Install adapter (3) and use torque wrench to tighten to the specified initial tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Adapter
Preload torque
(Engine oil)
5 Nm to 10 Nm
13.
Tighten screw (2) with torque wrench to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm + 10 Nm
14.
Tighten adapter (3) with torque wrench to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Adapter
Tightening torque
100 Nm + 10 Nm
Note:
Ensure special cleanness.
15.
Coat thread and sealing cone of HP line (5) with engine oil.
16.
Mount double-walled HP line (5) and use torque wrench to tighten to the specified torque. Tightening
sequence:
1 Adapter (4)
2 Rail (6)
Name
Size
Type
Lubricant
Value/Standard
Union nut / thrust
screw
Tightening torque
40 Nm + 5 Nm
MS150026/02E 2013-11
| Task Description | 81
TIM-ID: 0000000925 - 011
