MTS Systems THIR-6780 Series, Руководство по настройке

Страница: 19 / 96

18
Additional Symbol Information (Optional Data)
An optional single character (henceforth
“Front Character”) corresponding to the type of symbology of
the decoded symbol may be inserted before the decoded data. And similarly another optional
character (henceforth
“End Character”) may be inserted after the decoded data.
[Procedure]
(1) Enable or Disable to activate each Front Character and End Character setting respectively.
(2) Set the Front Character and End Character respectively.
The user has to follow the procedures in order otherwise the setup will be ignored.
1) Enter the Setup procedure
2) Review Character Set (refer to
“Character Code” section),
and then confirm upper data and lower data of the Front/End Ccharacter respectively.
3) Scan the
“Setup Front/End Character” for symbology type respectively.
4) Scan the
“Character Data” symbol corresponding to the upper data.
5) Scan the
“Character Data” symbol corresponding to the lower data.
Enable/Disable Front Character
To Enable or Disable Front Character, scan the appropriate symbol below.
Enable Disable
Front Character End Character
(*)
Enter Setup procedure of Front character
To enter Setup procedure of Front Character, scan the appropriate symbol below.
Setup Front Character Setup Front Character
for Code39 for Code128
Setup Front Character Setup Front Character
for DataMatrix for JAN/UPC